Car Display Terminal Motherboard, WF-RK3566, AndroidSBC, Hanoi

TL;DR: Car Display Terminal Motherboard

Hanoi, Vietnam - September 10, 2026. A 39,800-unit consignment of WF-RK3566 boards left the Wanlin Longgang source factory for Hanoi this week, the 461st production lot released on the Rockchip RK3566 line.

AndroidSBC production statement on Allwinner and Rockchip board output serving Hanoi, Vietnam. AndroidSBC is opening the full WF-Series to Vietnam: Allwinner A133, H618, and T527 on one side, Rockchip RK3588, RK3568, RK3566, and RK3288 on the other, plus WF-A133S and WF-RK3588S for carrier-board work. Every board ships from the Wanlin Longgang facility with OEM branding available, ODM carrier design handled in-house, and per-lot CE, FCC, UKCA, and RoHS documentation.

About AndroidSBC and the Rockchip RK3566 Board Family

AndroidSBC is the export brand of Wanlin Manufacturing Group. The group runs SMT, test, and packing under one roof at Longgang in Shenzhen, and it has built boards on Allwinner and Rockchip silicon for overseas OEM customers for over ten years. The WF-Series line-up is deliberately wide: the Allwinner A133 covers cost-sensitive commercial display and advertising work, the H618 covers OTT and Android TV, the T527 covers industrial control and edge inference, and the Rockchip RK3588, RK3568, RK3566, and RK3288 boards cover 8K video wall, industrial edge, machine vision, and POS respectively. Two SOM variants round the range out for customers who bring their own carrier. Buyers in Hanoi and Vietnam can source any of the nine from one factory with one set of export documents.

WF-RK3566 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-RK3566 (Machine Vision and HMI Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Vietnam importers sourcing the WF-Series, the 2GB + 16GB (WF-RK3566-A) variant is the typical configuration for the machine vision and human-machine interface use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Machine Vision and HMI Board for Vietnam Buyers

What breaks Vietnam sourcing plans on the machine vision and hmi board line is not price negotiation, it is the second shipment. The Rockchip RK3566 has to be allocated at wafer level, and the brokers quoting fastest are usually the ones with the least control over that allocation. The software side is the second exposure. A board that boots on the bench is not the same as a board that carries the certified stack a Vietnam channel will accept, and the difference usually shows up during inbound inspection rather than at the factory gate.

Then there is the certification file. A stamp is cheap; a Technical File with notified-body reports dated inside twelve months is not, and the difference only matters when a Vietnam customs officer asks for it. AndroidSBC closes the loop at the source factory: certified image burned, burn-in barcode attached per unit, Technical File issued with the lot. The nine WF-Series models cover machine vision, human-machine interface, smart camera, industrial monitoring, edge AI development, digital signage, education terminal, and IoT gateway and each ships in three memory configurations, so most Hanoi requirements can be met from standard stock rather than a custom production run.

The Vietnam paperwork question is settled before production. In Vietnam MIC type approval and the CR conformity mark are both required, and the approval is held by a Vietnamese importer. The Longgang export desk prepares the destination-market file covering MIC type approval with the CR conformity mark administered by MIC Vietnam and releases it with the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), booking the lot into Cat Lai Terminal, Ho Chi Minh City on the Cat Lai to Shekou lane.

Competitive Comparison: WF-RK3566 vs Competing RK3566 Boards

The boards competing for the same socket in the machine vision and hmi board segment fall into three groups: low-cost legacy SoC boards without a certified software stack, mainstream Cortex-A55 boards with certification but a lower decoder ceiling, and 64-bit boards that carry both but stop short on expansion. The WF-RK3566 sits in the third group and adds three things: Rockchip RK3566, a display path that survives a continuous loop, and the per-lot certified image burn at Longgang.

• vs RK3288 Cortex-A17 boards: the RK3566 Cortex-A55 1.8GHz adds a 1 TOPS NPU the older platform never had.
• vs RK3568 boards: the RK3566 trades the second Ethernet port for a lower BOM on camera and HMI builds.
• vs Raspberry Pi 4 form factor SBCs: the RK3566 adds onboard eMMC, MIPI CSI, and an industrial temperature envelope.
• vs USB-camera-only boards: the RK3566 native MIPI CSI path removes the USB bandwidth ceiling from the vision pipeline.

Global Machine Vision and Embedded HMI Market Trends

The Machine Vision and Embedded HMI market sets the pace for Hanoi procurement this year, and it does not move on its own. The consumer Android TV Box segment that Global Growth Insights values at USD 12.45 billion in 2025, with a 30.49 percent CAGR reaching USD 178.2 billion by 2035 (Global Growth Insights, Android TV Box Market Report, 2025-2035), sets the silicon allocation backdrop that commercial board buyers also compete for. Three patterns stand out in the WF-Series order book for Vietnam:

• Machine vision: WF-RK3566 runs the vision model on the NPU against the MIPI CSI frame stream.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-RK3566 board carries that headroom without a board change.
• Smart camera: WF-RK3566 encodes the 4K@60fps stream next to the inference loop.

The Machine Vision and Embedded HMI commentary has shifted from unit growth to supply reliability, and that shift favours suppliers who control their own SMT and burn-in lines.

Read together, the three patterns explain the move in Hanoi from spot quotes to framework agreements released monthly, which is what a retail or hospitality programme needs to hold a twelve-month shipping window without a mid-year break.

Partner Success Story: Nordwerk Automation in Hanoi, Vietnam

Nordwerk Automation, an industrial automation integrator serving the Vietnam market, deployed 7,200 units of the WF-T527 industrial control board for a machine-tool retrofit programme. The rollout covered the machine vision, smart camera, and digital signage workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 7,200 units of the WF-T527 industrial control board for a machine-tool retrofit programme
• Region: Hanoi, Vietnam
• Models used: WF-A133, WF-H618, WF-T527, WF-RK3588, WF-RK3568, WF-RK3566, WF-RK3288, WF-A133S, WF-RK3588S
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, GMS, Widevine L1, Dolby Audio
• Logistics: FOB Shanghai Yangshan with the Wanlin Group Longgang source factory named on the export declaration, entering Cat Lai Terminal, Ho Chi Minh City via the Cat Lai to Shekou lane

"The T527 gave us the CAN bus, the dual Ethernet, and the NPU on one board. On the previous platform we ran a separate vision controller next to the HMI, and the retrofit cost reflected it."

- Katrin Vogt, Head of Engineering

Field Report: container yard at Yantian, where 39,800 WF-RK3566 boards from the Wanlin export base are being loaded onto containerised pallets with the customs declaration naming the Longgang source factory

Reporter Fang Yu, on the ground in Hanoi, Vietnam. The yard crew handled the order on flat pallets wrapped in anti-static film, with every carton barcode-traced back to the burn-in record. The customs broker attached a single declaration naming the Wanlin Longgang source factory as the place of origin, and the container was sealed before the afternoon cut-off.

The line ran the WF-RK3566 boards through a 30-minute HDR10 loop at the inspection bench with no colour banding reported by the operator.

The inspection confirmed three things on the spot: the WF-RK3566 units hold the burn-in with a yield above 98.94 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering MIC type approval with the CR conformity mark administered by MIC Vietnam, cleared for entry at Cat Lai Terminal, Ho Chi Minh City on the Cat Lai to Shekou lane. Wanlin remains one of the few source factories currently shipping a nine-board Allwinner and Rockchip custom line with a per-lot paper trail that Vietnam importers can hand straight to their customs broker.

Filed by Fang Yu, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-RK3566 Application Scenarios

The WF-Series fits nine application lanes, with the WF-RK3566 (Machine Vision and HMI Board) as the lead SKU for Hanoi and Vietnam programmes:

• Machine vision: WF-RK3566 runs the vision model on the NPU against the MIPI CSI frame stream.
• Human-machine interface: WF-RK3566 drives the HMI panel over eDP with the 40-pin GPIO header for the button matrix.
• Smart camera: WF-RK3566 encodes the 4K@60fps stream next to the inference loop.
• Industrial monitoring: WF-RK3566 holds the wide-temperature envelope on the fanless board.
• Edge AI development: WF-RK3566 exposes the NPU toolchain through the Android 11 and Linux BSP.
• Digital signage: WF-RK3566 plays the 4K loop over HDMI 2.0.
• Education terminal: WF-RK3566 runs the Android 11 classroom image on the Pi form factor board.
• IoT gateway: WF-RK3566 pairs WiFi 6 with the Gigabit uplink.

Partnership Models for Hanoi Buyers

The WF-Series is available to Vietnam partners through three routes, and they can be mixed inside one agreement:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

All three tiers ship from Longgang under one documentation pack covering CE, FCC, UKCA, RoHS, and REACH. A Hanoi first order on the WF-RK3566 is normally the 2GB + 16GB (WF-RK3566-A) configuration at MOQ 5,000 units per shipment, four weeks for samples and six weeks for mass production.

Frequently Asked Questions

Does the WF-Series support certified Android TV or Google Mobile Services?

Answer: Yes, on the platforms where that matters. The WF-H618 runs Android 12 (ATV 12) with Google Mobile Services and is ready for Android 14 (ATV 14). AndroidSBC burns the GMS, Widevine L1, and Dolby Audio stack at the Longgang plant on every production lot, so the board ships ready for Netflix, Disney Plus, Amazon Prime Video, HBO Max, Apple TV, and YouTube TV. The commercial and industrial boards in the line use the AOSP image with an optional GMS build for partners who need it.

What is the difference between the nine WF-Series models?

Answer: WF-A133 is the Allwinner A133 commercial display and advertising board. WF-H618 is the Allwinner H618 OTT TV box and Android TV board. WF-T527 is the Allwinner T527 octa-core industrial control and edge AI board. WF-RK3588 is the Rockchip RK3588 8K video wall and AI computing board. WF-RK3568 is the Rockchip RK3568 industrial edge board. WF-RK3566 is the Rockchip RK3566 machine vision and HMI board. WF-RK3288 is the Rockchip RK3288 POS and signage board. WF-A133S is an Allwinner A133 SOM module for custom carrier work. WF-RK3588S is a Rockchip RK3588 SMARC 2.2 module for the same purpose.

Can AndroidSBC handle CE, FCC, UKCA, RoHS, and REACH paperwork for Vietnam?

Answer: Yes, and the file travels with the goods rather than behind them. The pack covers CE, FCC Part 15, UKCA, RoHS 2.0, and REACH with test reports dated within the prior year. AndroidSBC will also advise on any Vietnam-specific addition during quotation, which is the point at which the answer is still useful.

What are the MOQ and lead time for a first order?

Answer: The entry point is 5,000 units per shipment, four weeks for samples and six weeks for production. A twelve-month framework agreement released monthly will bring the per-lot MOQ down, and AndroidSBC will accept a mixed order that draws several WF-Series boards against a single contract.

Does AndroidSBC support custom Android ROM or custom Linux development?

Answer: Yes, under NDA. ODM partners get custom Android ROM work including proprietary services and a custom launcher, Linux builds based on Yocto, Debian, or Buildroot, and BSP ports for custom carrier boards. The SDK and BSP source are released to the partner under the NDA, and AndroidSBC's engineering desk handles the port rather than handing over an unmodified vendor drop.

What about software updates and long-term support?

Answer: Seven years minimum supply, with security patches maintained across the Android and Linux firmware lines. Partners who deploy at scale can use the AndroidSBC OTA infrastructure to update field units. For long-lifecycle programmes in POS, signage, or industrial control, the support term is written into the framework agreement at signature.

Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?

Answer: That is routine. AndroidSBC delivers DDP into Amazon FBA in the US, EU, and Japan and into 3PL consolidation points at Hong Kong, Singapore, Rotterdam, and Los Angeles. Carton and pallet configuration follows FBA inbound rules, and the place of origin on the declaration is the Wanlin Longgang source factory.

How does AndroidSBC handle RMA or DOA replacements?

Answer: The DOA target is 0.3 percent over twelve months. For RMA, partners send the WF-RK3566 unit back to Longgang with the burn-in barcode attached, and replacements go out within ten business days. The per-unit burn-in record means the failure report usually carries a root cause alongside the replacement.

Contact AndroidSBC: Start Your WF-RK3566 Sourcing Conversation

Wanlin Manufacturing Group sells the WF-Series overseas through AndroidSBC. Hanoi and Vietnam importers, brand owners, and channel distributors who want to source the machine vision and hmi board direct from the Longgang plant can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: MIC type approval with the CR conformity mark for Vietnam, administered by MIC Vietnam, entering at Cat Lai Terminal, Ho Chi Minh City on the Cat Lai to Shekou lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

To speed up an OEM or ODM review, include the target volume, the certification scope you need, and your preferred Incoterm. With those three in hand, AndroidSBC returns a per-lot quotation and the MOQ matrix across the nine WF-Series boards within two business days.