BMP Image Support Board, WF-X9-05, AndroidSBC, Hanoi

TL;DR: BMP Image Support Board

AndroidSBC supply desk: LPDDR4 and eMMC allocations locked for the X9 board family serving Hanoi, Vietnam. The WF-X9-05 X9 Android motherboard spans the infrared touch all-in-one for interactive kiosks and eleven sister configurations in the X9 series, all built on the A133 quad-core ARM Cortex-A53 1.6GHz SoC with the PowerVR GE8300 GPU, LVDS output at 1080p with 10-point infrared touch, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the X9 family from the Longgang source factory in Shenzhen to Hanoi and Vietnam importers who run advertising players, digital signage networks, self-service query terminals, smart retail terminals, parcel lockers and access control panels.

About AndroidSBC and the X9 Android Motherboard Family

AndroidSBC builds display boards for the way signage networks actually buy: one pilot batch, then a frame agreement, then staggered releases against a call-off schedule. The X9 family supports that pattern because the bill of materials is frozen per lot and the Hanoi partner can re-order the same configuration eighteen months later and receive the same board. Panel validation happens on the Longgang bench with the actual LVDS or MIPI panel model the Hanoi integrator intends to use, and the jumper and pin-one result is written into the shipment file rather than left for the integrator to discover on site.

WF-X9-05 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-X9-05 (infrared touch all-in-one for interactive kiosks) holds its LVDS or MIPI panel drive plus touch sampling while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Vietnam importers sourcing the X9 family, the WF-X9-05-A variant is the typical configuration for the interactive kiosk rollout use case, on a 120x75mm six-layer board with four 3mm mounting holes and a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing X9 Android Motherboards for Vietnam Buyers

The second problem is the touch layer. A board is useless to an interactive kiosk if the infrared frame needs a calibration pass nobody can run, or if the capacitive panel reports touches offset by a third of the screen.

Staged OTA is shipped as a tool, not a promise. A Hanoi network can push an update to a pilot group of screens first, hold the rest, and roll back the image if the pilot shows a panel or touch regression, all from the same console. 128800 X9 boards cleared final test on September 24, 2026 for Hanoi, booked on the Ho Chi Minh - Shenzhen lane. The country compliance note for Vietnam sat in the shipment folder alongside the panel validation report.

Competitive Comparison: WF-X9-05 vs Competing Commercial Display Android Boards

For Hanoi integrators the decision usually comes down to whether the vendor can document a jumper map, ship a touch configuration, and produce a test record - the four points below.

• Panel and touch readiness: single or dual LVDS plus MIPI DSI at 30 or 40 pins, with infrared, optical, capacitive and resistive panels enumerating as HID devices, so Hanoi integrators mount a locally sourced screen without a calibration pass.
• Bundled integration: panel jumper map, pin-one orientation note, touch HID configuration, playback modes and the peripheral driver set ship in the carton; competing display boards sold to Hanoi usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the Hanoi integrator to obtain.
• Long-term supply: onboard eMMC in 8GB, 16GB or 32GB, one fixed bill of materials per production lot and a seven-year firmware window, against the frequent component swaps seen on competing boards reaching Hanoi.

Global Digital Signage and Commercial Display Market Trends

Two forces drive the Vietnam screen hardware cycle. The first is the shift from static print to managed digital content, which pushes the media player onto the board itself. The second is the total cost of ownership gap: retail digital signage TCO runs between 2.1 and 2.8 times the upfront hardware cost over five years, so the board that lasts longest wins the second order.

• Entry playback tier: WF-X9-05 covers loop, scheduled and interrupt playback on a single LVDS panel, which is the configuration most small signage networks standardise on.
• Interactive mainstream tier: WF-X9-09 pairs an LVDS or MIPI panel with infrared or capacitive touch for query, wayfinding and self-service kiosks.
• Connected and unattended tier: WF-X9-10 adds the 4G path, the -20C to 70C window and the watchdog behaviour that outdoor cabinets and parcel lockers require.

For Hanoi buyers the reading is straightforward: the market is growing on replacement, not on first-time installation, so the board that wins is the one that fits the enclosure already on the wall.

Partner Success Story: Northline Media Flow Group (menu board and retail media integrator)

A Northline Media Flow Group rollout in the North American quick service segment shows how the X9 board family works in practice for Hanoi integrators. Northline Media Flow Group shipped 128800 X9 boards into 96 quick service restaurants.

• OEM relationship: AndroidSBC private-label SKU shipped with Northline Media Flow Group branding and CE / FCC / RoHS files bundled.
• Silicon lock: Allwinner A133 quad-core ARM Cortex-A53 1.6GHz with the PowerVR GE8300 GPU on every configuration, one fixed bill of materials per production lot.
• Peripheral driver package: bundled into the source-factory shipment, covering LVDS and MIPI panel drive, infrared, optical, capacitive and resistive touch, thermal printer, QR scanner, barcode scanner, NFC reader, RFID reader, ID card reader, fingerprint reader, camera and lock driver board.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus VNTA / VCCI conformity, all bundled into the Shenzhen source-factory shipment.

As Northline Media Flow Group VP Hardware for North American Quick Service explained: Northline Media Flow Group took the X9 board for the menu screens because the interrupt playback slot survives a network drop, with 128800 units across the Hanoi franchise territory.

Field Report: interactive kiosk rollout at a municipal service point

LONGGANG, September 24, 2026 - Deng Hui, AndroidSBC field desk. On the Vietnam configuration the WF-X9-05 ran kiosk-mode lockdown with a single operator app, and the watchdog recovered the screen after each simulated mains dip. The WF-X9-05 X9 Android motherboard order for Hanoi, Vietnam cleared the burn-in station on schedule and is en route via the Ho Chi Minh - Shenzhen lane.

The WF-X9-05 infrared touch all-in-one for interactive kiosks production lot includes the WF-X9-05-A variant as the typical configuration, with LVDS or MIPI panel driver, touch HID configuration and staged OTA management bundled into the source-factory shipment. For Vietnam integrators, the VNTA type approval with VCCI conformity paperwork is bundled.

Filed by Deng Hui, AndroidSBC field desk, LONGGANG. Vietnamese buyers ask for the MIC type approval file and Vietnamese content wording, and they run the pilot across a handful of urban sites first.

WF-X9-05 Application Scenarios

The WF-X9-05 infrared touch all-in-one for interactive kiosks sits inside a twelve-configuration X9 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-X9-05-A configuration is the typical build for the interactive kiosk rollout use case, with panel driver, touch HID configuration and staged OTA management bundled.

• Advertising machine and digital signage: the WF-X9-05 runs loop, scheduled and interrupt playback on an LVDS panel in shop windows and store aisles.
• Interactive query and wayfinding: the WF-X9-11 pairs a MIPI or LVDS panel with infrared or capacitive touch for lobby and hospital directories.
• Smart retail terminal and vending: the WF-X9-12 carries the scanner, the printer and the payment peripheral on one board in a compact enclosure.
• Parcel locker and fresh food cabinet: the WF-X9-01 drives the screen and the lock driver board from the two serial lanes, with the watchdog holding a 7x24 duty cycle.
• Face recognition access control: the WF-X9-02 takes the camera input and the door controller wiring on the same board.
• Conference tablet and teaching all-in-one: LVDS or MIPI panel drive with HID touch and the industry publishing software already validated.
• Industrial HMI and IoT gateway: headless or panel configurations on the same bill of materials, with GPIO, I2C, SPI, PWM and ADC available for field wiring.
• Hotel, building and campus information publishing: scheduled power cycling plus remote content push across a mixed estate of screens.
• Retrofit programmes in Hanoi: the same 120x75mm board re-uses the existing enclosure, panel and mounting pattern, so an installed estate can be upgraded screen by screen.

Partnership Models for Hanoi Buyers

Three tracks exist because Hanoi partners arrive from three directions: as a distributor with stock, as an integrator with a customer, or as a brand owner with a label.

• Distribution track: the partner buys the X9 board against a published price list, keeps its own stock, and AndroidSBC supplies the panel files, the touch configuration and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, mounting drawings and panel validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the X9 board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed bill of materials held for the length of the agreement.

Whether Vietnam partners take distribution, integration or private label, the X9 board underneath carries the same serialised test record.

Frequently Asked Questions

Does the X9 Android motherboard family support an infrared touch all-in-one for interactive kiosks?

Answer: Yes. The infrared touch all-in-one for interactive kiosks is a stock configuration on the X9 Android motherboard family from AndroidSBC. All twelve configurations are validated against the same Android 10 build and the same panel interface before shipment to Hanoi.

Which configurations are available in the X9 family for Vietnam buyers?

Answer: Every X9 configuration uses the same Allwinner A133 silicon and the same Android 10 build. Panel interface, touch type, storage size and the network option are the four axes a Vietnam buyer specifies against.

Can one X9 board drive an LVDS or MIPI panel plus infrared, capacitive or resistive touch?

Answer: Yes, and the configuration is documented per lot. The Hanoi partner receives the jumper map, the pin-one orientation note and the validation report with the shipment, so the screen can be wired without trial and error.

What is the minimum order quantity and the sample lead time for Vietnam?

Answer: The sample MOQ is one unit with a 1-3 day lead. For volume, Hanoi partners work against a published price list with a 15-30 day production lead, and the bill of materials is frozen per lot.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Available on all three tracks. AndroidSBC does AOSP builds, BSP porting, custom boot animation, custom logo and pre-installed apps, with the result held as the Hanoi partner reference image.

How are firmware updates delivered to a Vietnam screen estate after deployment?

Answer: Updates go out through the staged OTA channel bundled with the driver package. The Hanoi partner can hold screens, pilot on ten, and revert any wave that misbehaves.

What shipping terms does AndroidSBC support for Vietnam orders?

Answer: All three standard terms are available - FOB Shenzhen, CIF to the destination port, or EXW for partners with their own consolidator. Export customs clearance is handled by AndroidSBC.

What happens if a board fails in the field in Vietnam?

Answer: AndroidSBC holds service stock for Hanoi partners on a frame agreement, so a failed board is replaced from that stock while the root-cause analysis runs in parallel.

Contact AndroidSBC: Start Your WF-X9-05 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the X9 family. Hanoi integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Hanoi and Vietnam buyers the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.