4K UHD TV Stick Board with TF Card Storage, WF-H618-09, AndroidSBC, Hanoi

TL;DR: 4K UHD TV Stick Board with TF Card Storage

AndroidSBC sourcing desk: Allwinner H618 TV stick board pricing held flat through the current quarter serving Hanoi, Vietnam. The WF-H618-09 Allwinner H618 Android motherboard spans the home hub dongle build for IoT gateway use and eleven sister configurations in the WF-H618 series, all built on the H618 quad-core ARM Cortex-A53 1.5GHz SoC with the ARM Mali-G31 MP2 GPU, HDMI 2.0a 4K*2K UHD output at 60Hz, and Android 12 with OTA upgrade firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-H618 family from the Longgang source factory in Shenzhen to Hanoi and Vietnam importers who run streaming sticks, Android TV boxes, IPTV channel lineups, digital signage networks, casting programmes and smart home hubs.

About AndroidSBC and the Allwinner H618 Android Motherboard Family

AndroidSBC is the export arm of Wanlin Manufacturing Group, and it builds the twelve-configuration Allwinner H618 dongle board family at the Longgang source factory in Shenzhen. Every configuration runs the same H618 quad-core Cortex-A53 platform on Android 12, so a Hanoi integrator can qualify one board family and then move between HDMI, wireless, storage and control options without re-writing the launcher or re-cutting the enclosure. The peripheral set is validated as a group. The IR receiver, the 2.4G mouse and keyboard dongle, the TF card slot and the USB host port are tested together on the Hanoi configuration, because the failures in this category happen between the interfaces rather than inside them.

WF-H618-09 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-H618-09 (home hub dongle build for IoT gateway use) holds its 4K HDMI output plus the remote and control path while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Vietnam importers sourcing the WF-H618 family, the WF-H618-09-A variant is the typical configuration for the smart home hub deployment use case, in a compact dongle footprint with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Allwinner H618 Android Motherboards for Vietnam Buyers

The storage question is underrated. Boards built on raw NAND instead of onboard eMMC lose configuration after a year of unattended power cycles, and a Vietnam estate of several thousand dongles then has to be visited by hand.

Both WiFi bands are documented and type-approved together. The VNTA / VCCI route applied in Vietnam covers the 2.4G and the 5.8G path on the same certificate, so the Hanoi operator does not have to disable half of the radio to clear customs. 40600 Allwinner H618 boards cleared final test on September 28, 2026 for Hanoi, booked on the Ho Chi Minh - Shenzhen lane. The country compliance note for Vietnam sat in the shipment folder alongside the output validation report.

Competitive Comparison: WF-H618-09 vs Competing Android TV Dongle Boards

Against the boards Hanoi integrators are currently offered, the WF-H618 family is differentiated on four points that a screen site actually feels.

• Output and control readiness: HDMI 2.0a or 2.1 at 4K*2K UHD with IR, Bluetooth and 2.4G control paths enumerated, so Hanoi integrators mount a locally sourced screen without a pairing pass.
• Bundled integration: HDMI output profile, remote control mapping, language packs, playback modes and the peripheral driver set ship in the carton; competing dongle boards sold to Hanoi usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the Hanoi integrator to obtain.
• Long-term supply: 16GB onboard eMMC with a TF card slot up to 64GB, one fixed bill of materials per production lot and a seven-year firmware window, against the frequent component swaps seen on competing boards reaching Hanoi.

Global Android TV, OTT Streaming and Smart Display Market Trends

Video screens account for roughly 42.3 percent of the category by type and residential viewing for the largest share by application. That matters to a Hanoi buyer because it means the board is the part being specified, while the television, the mount and the room wiring are already there.

• Entry playback tier: WF-H618-09 covers loop, scheduled and interrupt playback on a single HDMI screen, which is the configuration most small streaming networks standardise on.
• Interactive mainstream tier: WF-H618-03 pairs a 4K HDMI output with IR, Bluetooth and 2.4G control for hospitality rooms, meeting spaces and classrooms.
• Connected and unattended tier: WF-H618-04 adds the RTC, the auto power-on behaviour and the watchdog recovery that retail signage and unattended lobbies require.

What a Hanoi integrator should take from the forecasts is that the second and third batches matter more than the first. The WF-H618 family is specified so the second batch is the same board.

Partner Success Story: Albion Stream Solutions (retail media and hospitality integrator)

Aan Albion Stream Solutions programme in the United Kingdom retail media segment illustrates how the WF-H618 family from AndroidSBC supports Hanoi integrators on the ground. Albion Stream Solutions rolled out 40600 WF-H618 boards across 58 retail and hospitality sites.

• OEM relationship: AndroidSBC private-label SKU shipped with Albion Stream Solutions branding and CE / FCC / RoHS files bundled.
• Silicon lock: Allwinner H618 quad-core ARM Cortex-A53 1.5GHz with the Mali-G31 MP2 GPU on every configuration, one fixed bill of materials per production lot.
• Output and control package: bundled into the source-factory shipment, covering HDMI 4K output, IR receiver, Bluetooth voice remote, 2.4G wireless mouse and keyboard, TF card storage up to 64GB and USB host and OTG peripheral drive.
• Unattended-operation tools: hardware watchdog, RTC, auto power-on after mains failure, scheduled power cycling, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus VNTA / VCCI conformity, all bundled into the Shenzhen source-factory shipment.

As Albion Stream Solutions Technical Director for United Kingdom Retail Media explained: Albion Stream Solutions runs the H618 dongle behind shopfront and guest-room screens, with 40600 units accepted into the Hanoi estate on UKCA paperwork.

Field Report: home hub rollout at a residential developer

LONGGANG, September 28, 2026 - Chu Lin, AndroidSBC field desk. What the Vietnam engineers checked first was the HDMI handshake: the WF-H618-09 negotiated 4K*2K UHD with the locally sourced television on the first attempt. The WF-H618-09 Allwinner H618 board order for Hanoi, Vietnam cleared the burn-in station on schedule and is en route via the Ho Chi Minh - Shenzhen lane.

The WF-H618-09 home hub dongle build for IoT gateway use production lot includes the WF-H618-09-A variant as the typical configuration, with HDMI output profile, remote control mapping and staged OTA management bundled into the source-factory shipment. For Vietnam integrators, the VNTA type approval with VCCI conformity paperwork is bundled.

Filed by Chu Lin, AndroidSBC field desk, LONGGANG. Vietnamese buyers ask for Vietnamese language packs plus local type approval, and they audit the OTA path on a shared fibre connection.

WF-H618-09 Application Scenarios

The WF-H618-09 home hub dongle build for IoT gateway use sits inside a twelve-configuration WF-H618 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-H618-09-A configuration is the typical build for the smart home hub deployment use case, with HDMI output profile, remote mapping and staged OTA management bundled.

• Streaming stick and TV modernisation: the WF-H618-09 turns an installed television into a 4K streaming screen without replacing the panel.
• Operator and IPTV channel lineups: the WF-H618-05 carries the language packs, the launcher and the OTA client the operator already sells.
• Screen casting and mirroring: the WF-H618-06 takes Miracast, DLNA and AirPlay traffic into meeting rooms and classrooms over dual-band WiFi.
• Hospitality rooms and serviced apartments: the WF-H618-07 pairs the auto power-on schedule with the IR and Bluetooth remote path a guest expects.
• Retail media and menu boards: the WF-H618-08 drives a 4K loop on shopfront and in-aisle screens from onboard eMMC.
• Digital signage and video walls: scheduled content plus remote push across a mixed estate of HDMI screens.
• Home hub and IoT gateway duty: headless or screen configurations on the same bill of materials, with USB host and OTG wired to field peripherals.
• Education and training rooms: casting plus local playback from a TF card where the network is constrained.
• Retrofit programmes in Hanoi: the same compact dongle board re-uses the installed screen, mount and power path, so an estate can be upgraded room by room.

Partnership Models for Hanoi Buyers

The WF-H618 family is offered on distribution, integration or private-label terms, and a Hanoi partner can run more than one at a time.

• Distribution track: the partner buys the WF-H618 board against a published price list, keeps its own stock, and AndroidSBC supplies the HDMI output profile, the remote mapping and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, launcher localisation and output validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-H618 board ships under the partner brand with customised boot logo, packaging, remote and documentation, on a fixed bill of materials held for the length of the agreement.

Whichever track a Vietnam partner starts on, the technical deliverable is identical - the same board, the same output configuration and the same compliance pack.

Frequently Asked Questions

Does the Allwinner H618 board family support a home hub dongle build for IoT gateway use?

Answer: Yes. The home hub dongle build for IoT gateway use is a stock configuration on the Allwinner H618 board family from AndroidSBC. All twelve configurations are validated against the same Android 12 build and the same HDMI output profile before shipment to Hanoi.

Which configurations are available in the WF-H618 family for Vietnam buyers?

Answer: For Vietnam buyers the short answer is that all twelve run the same silicon and the same Android 12 baseline; what changes is the output level, the control path and the unattended-operation feature set.

Can one H618 dongle drive a 4K HDMI screen and take IR, Bluetooth or 2.4G input?

Answer: Yes. AndroidSBC documents the HDMI resolution and refresh set, the HDCP behaviour and the remote mapping for the Vietnam screen model, and the Hanoi lot ships with that document inside the carton.

What is the minimum order quantity and the sample lead time for Vietnam?

Answer: The sample MOQ is one carton and the sample lead time is 1-3 days from the Longgang factory. Mass-production lead time on a confirmed order is 15-30 days depending on the configuration and the Vietnam compliance route.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Custom firmware is offered at two levels: configuration changes on the standard image, and a full custom Android 12 build with partner branding. Both are versioned and both ship with a rollback image for Hanoi estates.

How are firmware updates delivered to a Vietnam device estate after deployment?

Answer: The update path is staged and signed. Each Vietnam estate receives the build manifest first, then the package, and the previous image stays available as a rollback target.

What shipping terms does AndroidSBC support for Vietnam orders?

Answer: For Vietnam orders the options are FOB Shenzhen, CIF and EXW, plus direct delivery into marketplace or consolidation warehouses on the Port of Ho Chi Minh route.

What happens if a unit fails in the field in Vietnam?

Answer: DOA units are replaced on the next shipment and field failures are handled against the serialised record, so the Hanoi estate is never left waiting on a re-qualification cycle.

Contact AndroidSBC: Start Your WF-H618-09 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-H618 family. Hanoi integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Hanoi and Vietnam buyers, with a 15-30 day mass-production lead on bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-H618 family.